|
The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024
|
Latest message you have seen: Re: Re: placing microphones... |
[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Shuttle & via epia
- To: <ukha_d@xxxxxxx>
- Subject: RE: Shuttle & via epia
- From: Primoz Gabrijelcic <gabr@xxxxxxx>
- Date: Tue, 9 Jul 2002 14:30:30 +0200
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
I'm currently testing EPIA with C3 800 processor and 20 MB disk
(Samsung).
Very silent, very cute.
Current findings are:
- It can run Windows 2000 or Windows XP perfectly.
- Both composite and S-video outputs work as expected.
- If TV is connected to the EPIA at boot time, picture (incl. BIOS
start-up
sequence) will be automatically displayed on the TV (S-video takes
precendence over composite if both are connected).
- MP3 can be played without a problem.
- Typical DVD-ripped DivX uses 80% of the CPU (using bsplayer) and
plays
well (without skipping, etc).
- With additional network card it shold work well as firewall. I had
not
tried to install OpenBSD on it though (and I surely don't trust Microsoft
to
run my firewall).
- It is too slow to decode some Microsoft's streaming video (ASF or
whatever
that thing is called) - processor goes to 100%, sound is delayed and
frames
are dropped regularly.
- CPU is definitely too slow for PVR use.
- There seems to be no way to force default output to go to the TV. If
EPIA
is not connected to the TV at the boot, you have to either manually
switch
the output (if you have monitor connected so you can see what you're
doing)
or shutdown/restart (luckily, shutting down with the Power button works
well).
- I am only able to set TV out to two modes: approximately 2 cm over
border
of my TV set (so I can not see Start button at all) or approximately 2
cm
inside border (picture has dark border around it).
If you have any questions or any suggestions what to test just ask.
Best regards,
Primoz
> -----Original Message-----
> From: Marcus Warrington [mailto:marcusw@xxxxxxx]
> Sent: Tuesday, July 09, 2002 2:21 PM
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] Shuttle & via epia
>
>
> Just looking at the Via Epia boards and the Shuttle PC's.. has anyone
used
> these?
>
> They sound like they could be ideal for having in Node0, small
> and low heat.
>
> I'm thinking of maybe having one (Epia) as an internet gateway
> and firewall
> (using
> a USB ADSL connection). Another as an (wholehouse) MP3 jukebox and
yet
> another as
> a (wholehouse) DivX Jukebox (and DVD). Does anyone know if
> they're up to the
> job ?
> I'm thinking that maybe they won't have enough grunt to decode
> Divx (output
> via SVHS)
> or act as a PVR ?
>
> In the future another could also be running misterhouse or some other
such
> software.
>
> Marcus
Yahoo! Groups
Sponsor |
|
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Home |
Main Index |
Thread Index
|
|