RE: Re: BT cabling through patch panel

["Nikola Kasic" <nikola@xxxxxxx>]

No, you're not.

But I asume that you are not going to move your phone often, so you can connect the one that your're using only. And, in a few months time, when you want to use some other CAT5 point, just re-patch that point to BT line in node0 on patching port. That's why I recommend to use networks sockets everywhere. It's much easier to move adaptor then change the socket.

Cheers,

Nik

-----Original Message-----
From: psghome2002 [mailto:psghome@xxxxxxx]
Sent: 13 July 2002 19:18
To: ukha_d@xxxxxxxSubject: [ukha_d] Re: BT cabling through patch panel

Thanks Darren,

Just wanted to check I wasn't going to do something stupid.

--- In ukha_d@y..., "baker_darren" <darren@d...> wrote:
> Paul,
>
> That is exactly how you do it. You connect several patch panel
> connectors together in parallel.
>
> Regards,
> Darren
>
> --- In ukha_d@y..., "psghome2002" <psghome@h...> wrote:
> > How about patching it out to multiple CAT5 points? i.e. spliting
> the
> > incoming line and patching to, say, 4 locations. Would you
connect
> > several patch panel connectors together in parallel (wiring
behind
> > the panel) and then use these 'sources' to patch out to the
> required
> > points - a bit like a hard-wired telephone hub in concept.
> >
> > Paul.
> >
> > --- In ukha_d@y..., "Nikola Kasic" <nikola@k...> wrote:
> > > You just plug jour phone line in patching panel and then plug
> > phone in
> > > network socket. So you'll use Cat5 for phone line and any
> network
> > point can
> > > be used as phone point. That's how I use it (and most of the
> > people)
> > > Of course, you'll need adaptors for converting BT plug into
RJ45
> > and vice
> > > versa.
> > > You can find some at www.videk.co.uk. Try product code:
42824283
> > and you'll
> > > see the picture.
> > > It's under UTP/STP system components/voice network accessories.
> > > Cheers,
> > > Nik
> > >
> > >   -----Original Message-----
> > >   From: psghome2002 [mailto:psghome@h...]
> > >   Sent: 13 July 2002 10:06
> > >   To: ukha_d@xxxxxxx> > >   Subject: [ukha_d] BT cabling through patch panel
> > >
> > >
> > >   I know there has been a lot of posts in the past about BT
> > telephone
> > >   wiring over CAT5. I've had a search but couldn't find the
right
> > >   info...
> > >
> > >   I've now got most of the structured CAT5 cabling in place
and
> am
> > >   starting the (really tedious) job of terminating it to the
> patch
> > >   panels (3 x 48 way). What's the best way of wiring the phone
> > lines
> > >   so that I can use the patch panel to route a line to any of
the
> > >   outlets? Do you simply daisy-chain the incoming line to
several
> > >   patch panel ways and then patch to the relevant outlet?
Also,
> is
> > >   there a standard for colour coding i.e. which wires/pins on
> the
> > CAT5
> > >   correspond to the BT numbering system.
> > >
> > >   Thanks,
> > >
> > >   Paul.
> > >
> > >
> > >         Yahoo! Groups Sponsor
> > >
> > >         Click here to find your contact lenses!
> > >
> > >   For more information: http://www.automatedhome.co.uk
> > >   Post message: ukha_d@xxxxxxx> > >   Subscribe:  ukha_d-subscribe@xxxxxxx> > >   Unsubscribe:  ukha_d-unsubscribe@xxxxxxx> > >   List owner:  ukha_d-owner@xxxxxxx> > >
> > >   Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> > Service.



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Yahoo! Groups Sponsor

Click here to find your contact lenses!

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.