[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Way2Call Hi-Phone & BT socket
BT plug is line this....
6 5 4 3 2 1 TAG
Normally 1 and 6 are not fitted.
Keith
-----Original Message-----
From: Keyvan Rahimian [mailto:keyvan@xxxxxxx]
Sent: 20 July 2002 21:07
To: ukha_d@xxxxxxx
Subject: [ukha_d] Way2Call Hi-Phone & BT socket
Christian:
Just opened the convervter, the pins go like this:
assuming the the 1st pin on BT socket side is the 2nd pin (1st & 6th
conducters is not wired) next to the groove for the retention clip, and 1st
pin on the RJ11 side is the 1st pin on the left hand side, then:
BT RJ11
1 2 blue
2 1 red
3 4 white
5 3 green
As I said the 1st & last pin on the bt 6 wire not connected.
Hope this helps
Keyvan R
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|