The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Weather Station Bargain


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Still struggling



 

 

-----Original Message-----
From: Mark McCall [mailto:mark@xxxxxxx]
Sent:
31 May 2002 10:54
To: ukha_d@xxxxxxx Subject: Re: [ukha_d] Still struggling

 

> I’m still struggling to put together a system, and time is running out.

 

What happened to the Centralite System you had chosen?

 

It has too many limitations, and I can only get it on a supply only basis. I want someone to design a solution and install it for me. I’m happy to work on the logic of programming it after the fact, but is it too much to ask to get someone to supply a solution?

 

> Scene based lighting for around 20 loads – with hardwired control

 

What about CBus?  Or some of the really upmarket stuff like Creston etc/ LiteTouch is supposed to be coming to the UK next year.

 

It needs to be available now. Is there a list of CBus installers somewhere. I like the idea of CBus, but have only found one installer so far, and they aren’t particularly local.

 

> Hard wired networking

 

But you'll still need cable for you curtain control, light switches etc.  Seems mad not to put a few others in for data.

 

If it is Cbus (which seems the best system I’ve seen so far), then it will only be a single bus of cat5) given that it is only two rooms and I’ve been happily using a wireless network for 18 months, what is the point?

 

> Phone features of Comfort (that is handled by an ISDN PBX)

 

Can your PBX call your mobile when someone rings your door bell and let you speak to them?  Can you dial into your PBX and control your lighting, heating, curtains etc?

 

 

Yes the doorbell can be diverted. I haven’t seen the need to operate my curtains by phone once in my 35 years, but I’ll be able to link to the analogue part of my ADSL line.

 

> IR distribution – I’m almost certainly going to get a Marantz RC5200


I'm using one of those IR-RF-IR systems at the moment and it's uter crap (still waiting for Keith or Ian to release hard wired IR Systems :)  ).  Why not cable your IR when you have the chance?

 

Because Keith’s or Ian’s system isn’t available NOW. I’m sure the “pants” system will cope over the 10 or so metres I need it for.

 

Mark, my requirements are pretty much unique. I’m trying to automate a small living area, that most people wouldn’t bother with due to my disability. My comparably humble dwelling is attached to a house which is valued in the seven figure bracket, and the insurance company want me to install an alarm system that has full digital monitoring.

 

Due to my specific requirements, I can’t just up-sticks and stay with a mate if this stuff is to be installed at a later date, and being up and dressed at 8 am to receive workmen usually means getting up at between 5:30 and 6. For this reason, I want to have the whole shooting match installed before I move in. Something that might be available sometime next year is not right for me.

 

Tim.



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.