|
My UPS
(serial connection) is set to power down the server when the battery gets
low. I
have never had cause to try this next bit when connected to the UPS as it
lasts
nearly 3 hours but - the PC BIOS can be set to power up the PC on
connection of
the mains. I use this for X10 control of another PC as well. Remote on and
off
(off after shut down via remote control of course).
HTH
Ian
Having just built myself a server to sit in
the
garage and run homeseer, been away for a few days to find we've had a
powercut
and the machine was off, doh. I assume to shutdown properly when we get a
powercut it's simply a case of a UPS. My question is what is the safest
way to get the machine to restart when the power is resumed. I assume
this would not be a feature of the UPS.
Thanks,
Keith
For more
information:
http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:
ukha_d-subscribe@xxxxxxx
Unsubscribe:
ukha_d-unsubscribe@xxxxxxx
List owner:
ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is
subject to the Yahoo! Terms of
Service.
| Yahoo! Groups
Sponsor |
ADVERTISEMENT
;) |
|
|
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
|