Re: TTS and how to do it?

["Frank Mc Alinden" <armagh@xxxxxxx>]

Hi All
        Interesting topic which i wish i= knew more , i also was thinking of
something similar to Stuarts idea except using  a seperate transmitter= to
send coded signal and a rx built into rx board which decodes and turns on i= f
valid address recieved.

Frank Mc
----- Original Message -----
From: "Stuart Poulton" <swp@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Friday, June 14, 2002 7:10 PM
Subject: Re: [ukha_d] TTS and how to do it?


Just a few thoughts

> 1. Audio Out from PC connected to Veronica FM transmitter via a mixer,=
mixer to
> take audio signals from MisterHouse for TTS and my MP3 server.

Like it, a no-wires solution

> 2. 'Bare Board' type FM receivers in each room custom built with an amplifier
> and an X-10 Appliance Module.

Ok, but how about this,
Do you really need stereo ?
If not then how about using a say the left channel to carry a DTFM code, then put a DTFM decoder in each reciever to turn the amp on / off ? My
guess is that a DTFM reciever is less the =A320 (cost of an appliance
module)


> 3. MisterHouse then controls which receivers are turned on and off thr= ough
the
> X-10 module. (Time Lag remains acceptable for now)
>
> 4. Volume still a problem for me but working on some ideas for control= ling
> volume from MisterHouse instead of from the receiver.

You could probably do something with clever use of DTFM codes ?

Stuart





For more information: http://www= .automatedhome.co.uk
Post message: ukha_d@xxxxxxx Subscribe:  ukha_d-subscribe@xxxxxxx Unsubscribe:  ukha_d-unsubscribe@xxxxxxx List owner:  ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

For more information: http://www=
.automatedhome.co.uk 
Post message: ukha_d@xxxxxxx 
Subscribe:  ukha_d-subscribe@xxxxxxx 
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.