RE: Re: rio receiver 'lost' :(

["Jon Bhargava" <jonathan.bhargava@xxxxxxx>]

thanks Patrick, all seems to be ok now :)

-----Original Message-----
From: PatrickLidstone [mailto:patrickl@xxxxxxx]
Sent: Saturday, March 02, 2002 13:53
To: ukha_d@xxxxxxx
Subject: [ukha_d] Re: rio receiver 'lost' :(


--- In ukha_d@y..., "Brian G. Reynolds"
<brian.g.reynolds@n...> wrote:
> Hi Jon, I think the DDAR/Rio looks for the server.
>

Yes, the RIO requests an IP address from the PC server when the RIO
boots. On the DDAR this happens during when "Searching for
server" is
displayed on the LCD - I guess the RIO says something similar. At the
point where the address is successfully allocated, the server
software icon turns from red to blue and the DDAR/RIO should appear
in the Audio Receiver Manager.
It's also worth checking the Tools/IP Configuration settings to
ensure that (a) AutoConfiguration is enabled (b) against the right
interface if your PC has more than one network connection (unlikely)
and (c) that both the IP address range AND netmask is right for your
network.

Patrick





For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/