The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Structured wiring -> BT Secondary skts


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Barcode scanners...have I missed something here?


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Barcode scanners...have I missed something here?
  • From: "Ian Lowe" <ian@xxxxxxx>
  • Date: Wed, 6 Mar 2002 00:20:57 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Good points to note Ken. I imagine built-into the fridge will quickly
translate to
"retractable cable, fixed to the undeside of the cupboard above the
fridge"

Ian.

-----Original Message-----
From: Kenneth Watt [mailto:kennwatt@xxxxxxx]
Sent: 04 March 2002 18:14
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Barcode scanners...have I missed something here?


Ian,

It is possible to do this, i.e. build the electronics into the fridge's
door however, bear in mind that the fridge door is "foamed" and
there is
good reason for this. This stops hot air meeting cold and the consequent
condensation from forming and this can be a problem on EU cabinets that
are, by default, a maximum of 600mm deep as in EU kitchen unit depth.
The Yank ones are deeper and have far more substantial doors on them,
walk into John Lewis and you can see the difference!

To build into the door you would have to remove some of the insulation
and run the wiring inside the inner door panel, easy if it's not what we
refer to as a foamed door, that is the whole door is whapped together on
the line *then* the foam injected which is the case in 99% of cabinets
in the last few years, the downsides to this are that you cannot simply
pull the door apart and get it to re-seal, nor can you buy spares for
the actual door as such, it’s a full new door at £50 and upwards.

Another thing to remember is that the manufacturers have been trying to
get electronics to work in refrigeration for many a long year and most
of them do not live long, and they put them at the top or back of the
cabinet usually where they are away from the worst of the temperature
changes!

K.

> -----Original Message-----
> From: Ian Lowe [mailto:ian@xxxxxxx]
> Sent: 04 March 2002 09:02
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] Barcode scanners...have I missed something here?
>
>
> >The other problem mentioned, that seems a real problem, is
> >how on earth do you keep track of a carton of milk?
>
> Well, what you do is make the usage so trivial that it's second
nature.
>
> My though is: scanner built into the fridge door,
>
> you use milk, you scan it "out" and "in".
>
> if you finish it, and bin it, the server sends an email that evening,
(a
> summary of the day) which amongst other info says something like
"item
> 'PINT
> OF MILK' was taken from fridge, but not put back, is it ()finished
()not
> scanned back in error"
>
> of course there will be things missing, but like any system, it will
prove
> it's worth (if it has any)
>
> Ian.
>
>
>
> ------------------------ Yahoo! Groups Sponsor
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>




_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/





Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.