The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Radiator efficiency...


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Re: AD10's - Whats the biggest load you're switching?


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Re: AD10's - Whats the biggest load you're switching?
  • From: "Keith Doxey" <lists.diyha@xxxxxxx>
  • Date: Tue, 12 Mar 2002 15:44:56 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Remove the metal disc on the large round plastic assembly where the cable enters.
 
Inside it will be a thermostat. About 1 inch square with an adjustment dial in the top. They have a long rod which pokes down into the tank. It could be that either the thermostat is faulty or it is just set way too high.
 
The strap on thermostats are for controlling boilers and probably cant handle enough current without a relay.
 
Keith
-----Original Message-----
From: derekclydesdale [mailto:derekclydesdale@xxxxxxx]
Sent: 12 March 2002 14:14
To: ukha_d@xxxxxxxSubject: [ukha_d] Re: AD10's - Whats the biggest load you're switching?

I've been using one to switch my IH as well.

However, it only gets used in the summer months - so it's probably
only switched a few hundred times.

Keith, what you say about Thermostats is interesting.  One problem I
have is that my immersion produces boiling hot water - ie. almost too
hot to shower under.  There is no obvious thermostat on my tank, and
I was of the opinion that immersion heater elements had no thermostat
and were always on.  I was thinking of buying a "strap-on" (oops!)
model that fits around the tank, but is there a another way
of "regulating" the immersion element?  Do they have some sort of
setting internally?

Derek

> No. Not yet.
>
> Its turning the load OFF that can cause the problem as the contacts
can arc
> when opening. With an Immersion heater, there is a strong
possibility that
> the load is already off because of its built in thermostat
therefore there
> will be no arcing and it should last for a long time.
>




For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Yahoo! Groups Sponsor
ADVERTISEMENT

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.