RE: WAP11 Problem

["BUTLER, Tony, FM" <tony.butler@xxxxxxx>]

>Tony,
>I downloaded manual from their web site, and I'm just looking at it.
>
>But this manual looks slightly different from what I got with AP, maybe
newer version.

I think it's for the latest firmware (which I haven't yet downloaded), but
I
prefer to have fixed IP for things like server, my CM router, the AP etc.
I will be changing the IP of the AP to match my conventions (the
aforementioned list of devices all have IP's of 192.168.1.1 -
192.168.1.100).
That way, I always know I can connect to 192.168.1.1 and know it's the main
server etc, for if/when dns & stuff get screwed up......

>Unfortunatelly, I'm using ICS, which uses it's own DHCP server, which
has
it's own scope (192.168.0.2-192.168.0.254).
>It's all hardcoded, so I cannot change the scope to include AP's
default IP
address.

That's okay, just put the AP on 192.168.0.255 or .1 then!

I would have to use proper DHCP server, but Microsoft doesn't support them
running together on the same LAN. (although, I know that it's working).

Ah, this is where a router comes in!  Or use WinProxy or similar to act as
firewall/dhcp/ICS device.
Easy to set up & get going.  Cheap too......


Tony


********************************************************************
Visit our Internet site at http://www.rbsmarkets.com

This e-mail is intended only for the addressee named above.
As this e-mail may contain confidential or privileged information,
if you are not the named addressee, you are not authorised to
retain, read, copy or disseminate this message or any part of it.
********************************************************************