The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: X Box/Leopard/Ace


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Light wattage


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Light wattage
  • From: "Keith Doxey" <lists.diyha@xxxxxxx>
  • Date: Mon, 18 Mar 2002 13:02:59 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Or choose a fitting with several lamps :-)
 
....or several fittings.
 

Keith

www.diyha.co.uk
www.kat5.tv

-----Original Message-----
From: Nikola Kasic [mailto:nikola@xxxxxxx]
Sent: 18 March 2002 12:39
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] Light wattage

Thanks Keith,
but, then when one bulb dies, I don't know which one is dead, because both don't work. Shoudn't be a problem to work out, but still, could be a hassle if it happens too often.
I'll rather choose lights with single bulb. I have to replace them anyway.
Nik
-----Original Message-----
From: Keith Doxey [mailto:lists.diyha@xxxxxxx]
Sent: 18 March 2002 12:16
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] Light wattage

Not directly dangerous but.....
 
40 W may be insufficient load for the triac to latch on properly or may not be enough to enable the switch to operate properly.
 
No danger to hardware but possible safety hazard if there is no light. No worse than any normal single bulb blowing though.

Keith

www.diyha.co.uk
www.kat5.tv

-----Original Message-----
From: Nikola Kasic [mailto:nikola@xxxxxxx]
Sent: 18 March 2002 11:29
To: Home automation (E-mail)
Subject: [ukha_d] Light wattage

Hi,
I plan to replace my ligh switches in corridor with LW11Gs. My ceiling lights are 2x40W, which is 80W. Specs of LW11G are 60-500W.
However, If one bulb dies, wattage will drop to 40W, which is outside of the specification.
What will happen then? Is it dangerous? Should I replace my ceiling lights then?
 
Cheers,
Nik


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Yahoo! Groups Sponsor
ADVERTISEMENT

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.