Thanks I will take a look at tonight
and
get back to you J
-----Original Message-----
From: Kenneth Watt
[mailto:kennwatt@xxxxxxx]
Sent: 30 April 2002
14:44
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] british
gas
controller
Amar,
Yes and no!
It depends on the controller in essence, but
if
it's one of the old
time-clock type ideas it should be
"fairly" straight forward. If you can
pop the box of the wall there should be a
wiring
diagram on the back of
the actual clock unit. If from that you can't
figure it out then give me
a shout back and I'll see if I can
help.
K.
-----Original Message-----
From: Stuart Grimshaw
[mailto:stuart@xxxxxxx]
Sent: 30 April 2002 11:18
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] british gas
controller
On Tuesday 30 April 2002 10:48 am, Amar Nagi
wrote:
> I want to be able to turn on the gas hot
water using a appliance din
> module. Currently a british gas
controller is
turning on the water and
> central heating. Am i right in thinking
the
controller just acts like
a
> swich so there for i find the wires and
use
the din appliance switch
or is
> there more to consider ?
If you have a look at Automatedhome.co.uk
there
are a couple of articles
on
heating. On the tutorials page there is a link
to
Keith Doxey's guide to
how
he replaced his old timer with an AD10, and
also
under "My Experience"
there
is an article about how Keith helped Mark
control
his central heating
with
Homevision.
There are others too if you look through the
links
section.
HTH.
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe:
ukha_d-unsubscribe@xxxxxxx
List owner:
ukha_d-owner@xxxxxxx
Your use
of
Yahoo! Groups is subject to the Yahoo!
Terms of Service.