The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: LED garden lights


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Micromodules....


  • To: ukha_d@xxxxxxx
  • Subject: Re: Micromodules....
  • From: "andy_powell_is" <ukha@xxxxxxx>
  • Date: Wed, 01 May 2002 13:48:54 -0000
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

--- In ukha_d@y..., "Paul Gordon" <paul_gordon@h...> wrote:
> Too big, too easily seperated from the appliance.

Agreed,


>
> When you use an AM12 for something portable like an hoover, when
you've

You ARE going to have a problem using any type of module with a
hoover. A hoover WILL generate line noise and probably block your
signal.



> appliance, _and_ (hardest part coming up now...) you've got to
train SWMBO
> to always be sure to use the module each time...

There is no way on this earth that I would pay 70 quid for a plug. I
don't care if it had an internet connection, 70 quid is 70 quid. 6.4
plugs is a homevision controller. When you look at the pricing 70
quid Vs 24 quid it makes it very hard to justify.

> Some socket locations have a very hard time fitting a bulky AM12
in... -
> I've a couple of places where sockets are close to an overhead
obstruction
> and the height of an AM12 prohibits their use.

This is very true, appliance modules are bulky.. and ugly... but
cheap.

> There are 2 fuses in the supply to the appliance, - when one goes,
how do
> you know which one it is?

that's easy, put a nail across the appliance module in place of the
fuse :P

> The micromodules support status reporting, but the AM12's don't, so
no way
> of determining the state of anything plugged into an ordinary
appliance
> module...

yup, but there's more of an argument for adding this to the existing
AM12's - or in fact every other module - there is no excuse for them
not having this...

> Suppose you want to use it in a restricted-use type of scenario,
i.e. like a
> TV in a kids bedroom, - any kid would soon figure out that all
he/she has to
> do to circumvent your "parental control" is remove the appliance
module from
> the socket, and plug the appliance in directly! - not possible with
an X10
> plugtop...

Actually, they'd probably figure out that you just have to turn the
TV on and off a couple of times to get the module to turn itself back
on... this applies to both types..

Andy



Yahoo! Groups Sponsor
ADVERTISEMENT
Click Here!

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.