The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: [advert] CBUS Wireless units for sale + details of upcoming offers !!!


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Nicam modulation (or not) (OT)


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Nicam modulation (or not) (OT)
  • From: "Nick Broughton" <mail@xxxxxxx>
  • Date: Sun, 5 May 2002 23:47:01 +0100
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Thanks Phil

It seems that it was my understanding at fault.  Everything you say follows
>from audio carrier.

Nick
> -----Original Message-----
> From: Phillip Harris [mailto:phil@xxxxxxx]
> Sent: 05 May 2002 23:11
> To: ukha_d@xxxxxxx > Subject: RE: [ukha_d] Nicam modulation (or not) (OT)
>
>
>
> > In my experience if you record a Nicam broadcast on a mono
> > VCR (OK I know we are talking about stone age equipment, but
> > it's the technical aspect that bothers me), and then replay
> > it to a Nicam TV, why don't you get stereo?
>
> Because the NICAM carrier and signal is not recorded with the video and
> mono audio.#
>
> > I believe that Nicam is modulated onto the 'normal' audio
> > carrier.  Nicam modulation is expensive so VCR's don't do it,
> > but if the Nicam was never demodulated, why isn't it the
> > original modulated signal recorded and passed to the TV?
>
> Nope ... It's sent modulated onto a carrier offset by a frequency which
> I cannot remember from the base UHF frequency of the channel.
>
> > As I'm writing something else ocurrs to me.  Even a Nicam VCR
> > could record audio before decoding it, but again in my
> > experience they only playback mono if connected via RF, you
> > need to connect via something 'better' to get stereo.
>
> NICAM VCRs do decode the NICAM audio and record it as a HiFi Stereo
> (separate to the linear mono) track ... They pass that signal out as
> stereo audio on phonos or SCART sockets - they do not remodulate as
> NICAM as there are no decent cheap domestic NICAM encoders availsble.
>
> > What's wrong?  My experience or my logic?
>
> Your expectations?
>
> Phil
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx > Subscribe:  ukha_d-subscribe@xxxxxxx > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx > List owner:  ukha_d-owner@xxxxxxx >
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>



Yahoo! Groups Sponsor
ADVERTISEMENT

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.