RE: Automated Oven?!

["Kenneth Watt" <kwatt@xxxxxxx>]

> Freestanding.

Okay, the best I can suggest is to put a Dallas stat inside the steam
vent at the back mounted so it measures the air temp, not the casing!
There should be one on a freestander and chart the temp through a
heat-up/cool-down and then program the controller to respond to what
you
discover is the minimum to mean that the temp is safe and the whatnot
and program what you want based on that info.

> TBA.  Probably a CM12 to be replaced by Homevision when the IT
slump
> finally
> ends :-/

Obviously a *LOT* easier with HV! ;)

HTH

K.

Yahoo! Groups Sponsor

ADVERTISEMENT

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx 
Subscribe:  ukha_d-subscribe@xxxxxxx 
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.