|
|
The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024
|
|
Latest message you have seen: Re: Geovision problem
|
[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: Increasing the REN #
- To: ukha_d@xxxxxxx
- Subject: Re: Increasing the REN #
- From: "Patrick Lidstone" <patrick@xxxxxxx>
- Date: Tue, 19 Nov 2002 11:11:04 -0000
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
--- In ukha_d@y..., "Paul Gordon" <paul_gordon@h...>
wrote:
> While on the subject of the bell wire, following a couple of
unwelcome
> late-night phone calls, I have been considering putting a switch in
the bell
> wire on the incoming line (most likely a relay controlled by the
HA), to
> enable me to instantly disable all internal phone ringing, but
still leave
> the phones operable if we want to dial out...
>
> Is this feasible?
Yes, so long as your phones use third-wire ringing.
It should also be possible to switch the bell back in based on caller
id :-)
Patrick
http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Home |
Main Index |
Thread Index
|
|