The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: Micro Module Dimmer Units.


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

HELP - PowerFlash with reed switch doing odd things


  • To: ukha_d@xxxxxxx
  • Subject: HELP - PowerFlash with reed switch doing odd things
  • From: "Bov" <abovingdon@xxxxxxx>
  • Date: Tue, 19 Nov 2002 11:41:53 -0000
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx


This is now causing so much traffic that it's blocking the other X10
stuff from functioning :-(

Since things did work fine - I'm predicting that the reed switch is
failing in some way - Are these things suitable for exterior use, or
only interior?

I have the powerflash unit set to B and 3 on the front, with the reed
switch connected directly - there is more than one screw contact on
the inside, any particular one I should be using?

Any help would be great.



--- In ukha_d@y..., "Bov" <abovingdon@y...> wrote:
>
> I have a powerflash unit connected to a Maplin sourced reed switch -

> it's the "heavy duty" unit that is supposed to handle movement of
> doors etc. The switch is attached to a garden gate, cable runs
about
> 2 meters into the garage to the powerflash unit. It's assigned as
B9
> where there are no lamps etc on "B" house setting.
>
> The HomeVision detects the B9 on/off and triggers outside lights to
> come on/off accordingly.
>
> Problem is that at random points I am seeing the unit send on/off
> signals for no apparant reason - it sends about 5-6 on/off signals
in
> a burst with a second between. I have tried wobbling the gate but
> that does not seem to cause the problem - so I don't think it's
wind.
>
> If I turn the powerflash off and on it seems to not send the
signals
> for a while, not sure if this means the powerflash is the problem
or
> simply that the problem is not happening at that time.
>
> I am in the process of trying some things and trying to track the
> issue down - but thought I'd see if anyone had any ideas? Could it
be
> conflicts in X10 signals? I'll try changing it's address. Can
> moisture affect the reed switch and cause this?
>
> Any ideas?
>
> Bov!


http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.