RE: 2 KAT5 Questions

["Phillip Harris" <phil@xxxxxxx>]

Would that be above IR return and the switcher or below?

Phil

> -----Original Message-----
> From: Keith Doxey [mailto:lists.diyha@xxxxxxx] 
> Sent: 12 October 2002 15:06
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] 2 KAT5 Questions
> 
> 
> As Tony says,
> 
> VGA is on the "ToDo" list.
> 
> I did consider a KAT5 SCART Plate but it would need two cable 
> feeding it to supply the AV signals and power to drive the 
> electronics. It also goes against the whole concept of CAT5 
> in that the flexibility offered by structured cabling is lost 
> by having a faceplate dedicated to a single purpose.
> 
> I may put it back onto the "ToDo" list after VGA if there is
> sufficient interest.
> 
> Keith
> 
> www.diyha.co.uk
> www.kat5.tv
> 
> 
> -----Original Message-----
> From: BUTLER, Tony, FM [mailto:roaming@xxxxxxx]
> Sent: 11 October 2002 11:01
> To: 'ukha_d@xxxxxxx'
> Subject: RE: [ukha_d] 2 KAT5 Questions
> 
> 
> > I have two questions on KAT5
> >
> > 1. Is there/or are there any plans to do a version of Kat5 
> to transmit 
> > VGA and Sound??
> 
> A VGA one is on the "to do" list ISTR.  It would use
all 
> available pairs though, as per RGB, so you'd need a separate 
> audio feed.
> 
> > 2. Would it be possible to take a KAT5 out of it's current case
and 
> > shoe horn it into a very deep double socket back box?? It 
> would help 
> > with the SWMBO apporval if there wasn't a box to be seen??
> 
> The SCART sockets are surface mounted, so you'd have a bit of 
> frigging about to do.  Without measuring them (no units here)
> I'd say they might be a bit too big for a double socket box - 
> however, there should be nothing stopping you burying the 
> unit and PSU in the wall and running fly leads to a double 
> socket with just an RJ45 and SCART socket on it.....
> 
> Maybe KAT5:Next Gen will be double socket mountable.....
> 
> Tony.
> 
> 
>
********************************************************************
>       Visit our Internet site at http://www.rbsmarkets.com
> 
> This e-mail is intended only for the addressee named above.
> As this e-mail may contain confidential or privileged 
> information, if you are not the named addressee, you are not 
> authorised to retain, read, copy or disseminate this message 
> or any part of it. The Royal Bank of Scotland is registered 
> in Scotland No 90312 Registered Office: 36 St Andrew Square, 
> Edinburgh EH2 2YB Regulated by the Financial Services Authority
>
********************************************************************
> 
> 
http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here -
http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/




http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx 
Subscribe:  ukha_d-subscribe@xxxxxxx 
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here -
http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/

Yahoo! Groups Sponsor

ADVERTISEMENT

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx 
Subscribe:  ukha_d-subscribe@xxxxxxx 
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.