|
The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024
|
Latest message you have seen: RE: Long analogue sampler |
[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Palm Remote-- need advice/help
- To: <ukha_d@xxxxxxx>
- Subject: RE: Palm Remote-- need advice/help
- From: "Ian B" <Ian@xxxxxxx>
- Date: Sat, 7 Sep 2002 19:25:29 +0100
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
If he is doing the design and everything as well then it is very good
value.
Even for someone like myself a small board will take an hour to produce
at
best and more at worst. The design takes a lot longer so you don't
really
give enough info to give a valid opinion.
Ian
>-----Original Message-----
>From: James [mailto:James@xxxxxxx]
>Sent: 30 August 2002 23:07
>To: ukha_d@xxxxxxx
>Subject: [ukha_d] Palm Remote-- need advice/help
>
>
>As you may (or may not) know I am trying to develop a Palm based HA
>remote controller which is networked over Cat5. I have nearly
finished
>all the software and now looking at the hardware. I have a
working
>circuit, I now need a PCB to go forward. This is an area I know
nothing
>about. I found a guy in America that can do the PCB at $25 for 6
and
>$18 for 20 but this seems alot to me. It is a simple board 2
sided and
>4"x2" in size(guesstimate). Any ideas of where to
look/start? There
>must be a cheaper way of doing this.
>
>Help!
>
>James
>
>Palm remote current status:
>
>Palm side
>=========
>Screens available:
>10 button
>5 button
>5 button and 1 fader
>4 faders
>Info screen for caller ID type info
>Remote backlight control
>
>PC side
>=======
>Can send UDP and DDE
>Support for upto 255 remotes
>All textfile based, with independent screens for each IP
>
>
>Next
>====
>xAP in and out
>Hardware
>Website
>add VFD or lcd to give each remote an "even remoter" display
(using
>siteplayer's SPI port)
>Let other people play with it
>
>
>
>
>
>
>http://www.automatedhome.co.uk
>Post message: ukha_d@xxxxxxx
>Subscribe: ukha_d-subscribe@xxxxxxx
>Unsubscribe: ukha_d-unsubscribe@xxxxxxx
>List owner: ukha_d-owner@xxxxxxx
>
>List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Yahoo! Groups
Sponsor |
ADVERTISEMENT
| |
http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Home |
Main Index |
Thread Index
|
|