The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: New Poll


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Wireless peer to peer



just for info.
Both card are on XP machines?
If yes, is possible to need something like Client Manager (for Compaq/DELL cards). In my case, when I upgrade the PC to XP too, the WLAN stops and cannot be started without Client Manager installed on one of the computers (not on both), PC in my case.
It is not used anymore for WLAN configuration in XP, but... I don't know... for me the WLAN doesn't work without it.
 
Good luck,
Dan
----- Original Message -----
Sent: Saturday, September 14, 2002 1:09 PM
Subject: Re: [ukha_d] Wireless peer to peer

I have both machines set up with static IP's. 10.2.0.1 & 10.2.0.2. They're both those Enterasys things. (Lucent rebaged)
----- Original Message -----
From: Dan
Sent: Saturday, September 14, 2002 10:31 AM
Subject: Re: [ukha_d] Wireless peer to peer

Hi,
 
I have 3 WiFi cards (one Compaq WL210-PCMCIA+PCI/PCMCIA adapter) in the PC which is connected to the internet using a cable link, one DELL TrueMobile card in a Toshiba Portege 3110CT and one Compaq WL100 card in a Compaq iPaq H3870 (plus one bluetooth ).
They all wwork fine and connect to the internet using any of them truough the PC.
 
More than that, I can use both 802.11b and bluetooth connections in the same time.
 
The best and most reliable connection I get with static IP Addresses. The PC with Windows XP use Internet Connection Sharing, but the DHCP functionality is nod used on Wireless LAN.
 
BR,
Dan
----- Original Message -----
Sent: Saturday, September 14, 2002 11:57 AM
Subject: [ukha_d] Wireless peer to peer

Has anyone succesfully set up their wifi cards in a peer to peer
configuration?

I have cards in my Fujitsu & lappy, and they're both setup with IP's. The
client tool that comes with them is able to see both cards, and XP can see
the network name I set up on the Fujitsu.

They cannot ping each other though.

Any ideas anyone?



http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Yahoo! Groups Sponsor
ADVERTISEMENT

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.