|
The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024
|
|
[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: Re: How geographically big can a Wireless LAN be?
- To: ukha_d@xxxxxxx
- Subject: Re: Re: How geographically big can a Wireless LAN
be?
- From: Andy Laurence <andy@xxxxxxx>
- Date: Mon, 16 Sep 2002 13:08:40 +0100 (BST)
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
On Mon, 16 Sep 2002, Nick Towers wrote:
> OK, looking at this further, using 2 highish gain antennae, is it
> possible to direct their "beams" to meet at the apex of a
triangle
> somewhere above ground, thus avoiding buildings, hills etc which
> might be in the way?
Simple answer this time. No. Imagine the radio waves are torch
beams.
Even though they cross in the middle, you can't see it from the ground.
> Also, if you're going to use a high gain antenna, do you need a
> special card or AP, or any additional hardware to amplify signals
etc?
You need a card with an external antenna connection or a soldering iron
;-)
You certainly do *not* want an amplifier, but you will need a pigtail to
connect the antenna if you're using Lucent-based cards. This is just
a
cable with an antenna connection at one end, and a connector for the card
at the other. Nothing special, bar the outrageous pricing.
Andy
--
Building a wireless community network for Bristol
http://consume.andylaurence.co.uk
- updated 14/09
4x4 in town - bog brush for your teeth
NB: Alternate E-Mail - andylaurence at yahoo dot co dot uk
http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Home |
Main Index |
Thread Index
|
|