The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: What do people use for terminal blocks in Node 0?


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [OT] 24hr ISP wanted


  • To: ukha_d@xxxxxxx
  • Subject: Re: [OT] 24hr ISP wanted
  • From: "Graham Howe" <graham@xxxxxxx>
  • Date: Mon, 23 Sep 2002 15:25:33 -0000
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

--- In ukha_d@y..., "Dave McLaughlin" <dave@v...> wrote:
> Hi John,
>
> The problem for me is that I use an external Netgear router so I
don't have
> control over the number it dials.

I use an external Zyxel router which I believe runs the same software
as a Netgear. If so then you can script a telnet session (various
freeware out there to do this) which includes commands to switch ISP.

I did actually have this working OK to switch between Freeserve
(during the week) and another ISP that had a very reliable service
but only free at weekends. There were a few 'mis fires' of the script
though, probably due to commands coming through too quickly or just
dodgy freeware application. I changed away from Freeserve before I
actually bothered sorting out the issues.

Graham


Yahoo! Groups Sponsor
ADVERTISEMENT

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.