[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: SliMP3 in-wall installation
- To: ukha_d@xxxxxxx
- Subject: Re: SliMP3 in-wall installation
- From: Bruno Prior <bruno@xxxxxxx>
- Date: Tue, 29 Jul 2003 16:12:25 +0100
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- References:
<000101c3552e$f70607d0$0200a8c0@bt922268>
- Reply-to: ukha_d@xxxxxxx
Fair enough. But are there any tips on the actual cutting? Do I just use
a hacksaw? Should I be applying heat to soften it? How do I get the nice
rounded corners that the guy at dhunay.com got? As you can tell, I've
got zero experience at this sort of thing, and I want to make as nice a
job as possible without too much trial and error.
Cheers,
Bruno
Keith Doxey wrote:
> Dont have one myself but I would go to the local perspex supplier and
get a
> piece of smoked perspex and cut it to the desired size. That way, you
can
> save the original fascia should you ever want to restore it to being a
> normal SliMP3.
>
> Keith
>
> www.diyha.co.uk
> www.kat5.tv
>
>
>
>>-----Original Message-----
>>From: Bruno Prior [mailto:bruno@xxxxxxx]
>>Sent: 28 July 2003 18:16
>>To: ukha_d@xxxxxxx
>>Subject: [ukha_d] SliMP3 in-wall installation
>>
>>
>>I want to do an in-wall installation of my SliMP3, pretty
>>similar to the
>>one pointed out on this list at www.dhunay.com. He seems to have
>>modified the front screen, to remove the bit that wraps round
>>underneath
>>to act as a stand. How would one go about doing that?
>>Obviously I would
>>like to achieve a tidy finish to look pretty similar to his.
>>
>>Cheers,
>>
>>Bruno
Home |
Main Index |
Thread Index
|