The UK Home Automation Archive

Archive Home

Group Home

Search Archive
Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

19" Rack strong enough?

To: "ukha" <ukha_d@xxxxxxx>
Subject: 19" Rack strong enough?
From: "David Anumudu" <david.anumudu@xxxxxxx>
Date: Wed, 30 Jul 2003 17:23:30 +0100
Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
Reply-to: ukha_d@xxxxxxx

I am fitting 3 rack mount servers, each 4u in to a standard 19" rack
cabinet. The serverseach weigh about 10kg-15kg, and my concern is that they
are only attached at the front of the rack by the 4 screws, meaning the
rear
of the server case is not suspended.
are there brackets available to suspend the cases at the back of the
cabinet, or is that overkill?

cheers

Follow-Ups:
- Re: 19" Rack strong enough?
  - From: "David Harris" <dh140770@xxxxxxx>
- 19" Rack strong enough?
  - From: "Tracey Gardner" <tracey.gardner@xxxxxxx>

Prev by Date: 4U Rackmount Server Cases
Next by Date: Re: 19" Rack strong enough?
Previous by thread: 4U Rackmount Server Cases
Next by thread: Re: 19" Rack strong enough?
Index(es):
- Date
- Thread

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.