[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: Cable marking ?
- To: ukha_d@xxxxxxx
- Subject: Re: Cable marking ?
- From: Jim Noble <mlist@xxxxxxx>
- Date: Tue, 19 Aug 2003 00:43:52 +0100
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
(try again from the correct address this time...)
On Mon, 18 Aug 2003 16:53:28 +0100, "Marcus Warrington"
<marcusw@xxxxxxx>
wrote:
> Nearly bought a Dynamo device but was concerned about how well the
> "glue" on the tape would stick to the cable.
> What have others done ?
I've used a labelling machine and clear heatshrink for automotive stuff
before. Although you have to take care with the application of heat as
some (most?) labelling tapes these days are thermal! (You could always
use excess heatshrink and only shrink the ends I suppose).
Jim
Home |
Main Index |
Thread Index
|