[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: C-Bus and Wire-wound transformers - HELP
- To: <ukha_d@xxxxxxx>
- Subject: RE: C-Bus and Wire-wound transformers - HELP
- From: "Keith Doxey" <ukha@xxxxxxx>
- Date: Fri, 22 Aug 2003 09:12:45 +0100
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
> -----Original Message-----
> From: Neil Ball [mailto:neilball@xxxxxxx]
>
> The LV transformer issue is a bit of a problem for dimmer
> manufacturers, in
> fact Lutron sell there own rebranded transformers which they
> guarantee won't
> buzz with their dimmers to make sure the transformer is a
> known variable in
> the problem. Even then you can get the lamp filament buzzing
> as well which
> can be just as bad!
Lutron also sell trailing edge dimmers.
In a trailing edge dimmer the power is applied at the start of the mains
cycle then removed halfway through the cycle for 50% dimming unlike a
traditional leading edge dimmer where power would be applied halfway
through
the cycle and removed at the end of the cycle.
As power is supplied with the voltage at almost zero there is no surge to
cause the buzz.
With leading edge dimmers, the suppression choke also limits the rise time
of the current, the larger the choke the slower the rise time, the less the
filaments and transformers will buzz. Unfortunately, chokes are bulky and
expensive and can also buzz themselves but normally they are located away
>from
Keith
www.diyha.co.uk
www.kat5.tv
Home |
Main Index |
Thread Index
|