The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: How to work out what type of power generator?


  • To: ukha_d@xxxxxxx
  • Subject: Re: How to work out what type of power generator?
  • From: "David Buckley" <db@xxxxxxx>
  • Date: Fri, 29 Aug 2003 20:23:19 -0000
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

--- In ukha_d@xxxxxxx, "John Benfield" <yahoo@b...> wrote:

Not really.

SMPSs convert mains AC to DC, and then "chop" that DC at a high
frequency into a transformer.  There is almost always a feedback
loop that measures the output voltage and ajusts the chopping action
to regulate the output voltage.

Have a look at http://www.electronics-tutorials.com/basics/switched-
mode-power-supplies.htm, particularl the picture entitled "Switched
mode supply - 80% efficiency".  It shows how AC mains is rectified
to DC, smoothed by a capacitor prior to feeding the chopper.

Thus for the SMPS to work, there just has to be an adequate voltage
across the mains smoothing cap at all times.  So DC, or a
sufficiently swift frequency of sufficiently high enough voltage
will do very nicely.

Much the same is also true of inverters and on-line UPSs - but
beware of the input transformer arrangements.






Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.