[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Source of acrylic rod
- To: ukha_d@xxxxxxx
- Subject: Source of acrylic rod
- From: "Graham Howe" <graham@xxxxxxx>
- Date: Wed, 03 Dec 2003 16:44:44 -0000
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Just thought I'd pass on the following information after spending the=20
best part of an hour trying to get hold of some acrylic rod.
I am planning to put HomeVision, Firm and a few other bits into a=20
rack mount case as per the fine example at Frank's site=20
http://www.users.bigpond.com/armagh/page58.html
As with Frank's example I want the boards at the back of the case for=20
connections, but want to see the status of the LEDs at the front of=20
the case. So I wanted some clear acrylic rod (preferably 5mm) to=20
transmit the light. I tried Maplin, Farnell/CPC, RS all to no avail,=20
then a google search turned up these guys http://www.gcip.co.uk/ and=20
after a quick phone call I now have a few lengths of 5mm rod in the=20
post.
The cost is =A39.16 per 2m length, but postage is =A312.50 because of
the=20
size. However I said I was happy for them to snap the rods to a=20
length that would fit in a jiffy bag and they're sending them in the=20
post for free. So including VAT I am paying about =A332 for a total of=20
6m which should be enough for many projects to come :-)
Home |
Main Index |
Thread Index
|