Re: New bedroom advice

["Dean Smith" <ukha@xxxxxxx>]

An LD11 requires a neutral at the LD11 unit.

It doesnt require one at the momentary switch used to control it. Both the
feed and return for the switch are wired directly back to the LD11

Dean



----- Original Message -----
From: "Robert Welsh" <bob-ukha@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Monday, December 08, 2003 4:38 PM
Subject: RE: [ukha_d] New bedroom advice


> Mal,
>
> I don't understand how an LD11 can be used without a neutral - can you
> explain this a bit further ?
> Or have I the wrong end of the stick here ?
>
> Unless you're talking about locating the LD11 by the light itself (as
> opposed to the switch)?
>
> Cheers,
>   Rob
>
> > -----Original Message-----
> > From: Malcolm Lansell [mailto:mlansell@xxxxxxx]
> > Sent: 08 December 2003 12:43
> > To: ukha_d@xxxxxxx
> > Subject: Re: [ukha_d] New bedroom advice
> >
> >
> > Use the X10 DIN dimmer - LD11.  It's a bit more expensive,
> > but it has connections for a switch, so you'll save on not
> > having to buy the micromodule.  You won't need a neutral wire
> > at the switch - just replace it with a momentary / push
> > button one, and wire the contacts to the dimmer module
> > instead of the lamp.
>
>
>
> UKHA 2004: 15th and 16th May 2004
>
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>