[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Cat 5 doublers
- To: <ukha_d@xxxxxxx>
- Subject: RE: Cat 5 doublers
- From: "Steve Morgan" <smorgo@xxxxxxx>
- Date: Sun, 14 Dec 2003 14:37:27 -0000
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Malcolm,
I use a variation on these to run ethernet and telephone down the same
cable. They're basically the same but with slightly different wiring. I
also
have some ethernet doublers, but I've not tried them yet. However, the
ethernet+phone ones are absolutely fine.
As you correctly assume, you plug one of them at each end.
The ones I have are a different make and come from Lindy
(http://www.lindy.com/uk/productfolder/03/34003/index.php).
Although they're
listed as 10Base-T, I've had no problems with them running at 100Base-TX.
Steve
> -----Original Message-----
> From: Malcolm Surgenor [mailto:malcolm@xxxxxxx]
> Sent: 14 December 2003 14:16
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] Cat 5 doublers
>
> Has anyone used these?
>
> Cat.5 10/100 TX Base Economisers - see
> http://www.videkonline.co.uk/SubSections.asp?sectionID=37#
>
> I find myself short of a cat5 socket in one particular room
> and wondered about using one of these 'doublers'. I'm a bit
> confused about the wiring comments though. I had thought it
> was just a case of plugging in one of these at either end of
> the cable run...
>
> Malcolm
Home |
Main Index |
Thread Index
|