[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: PABX and ADSL phone lines
- To: <ukha_d@xxxxxxx>
- Subject: RE: PABX and ADSL phone lines
- From: "Steve Morgan" <smorgo@xxxxxxx>
- Date: Wed, 17 Dec 2003 11:48:27 -0000
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Pete,
What's wrong with your Omnicom? There's a number of common faults that are
easy enough to fix and I've still never found a reasonable alternative.
I also have ADSL and an Omnicom FS2828 PABX and, as you say, it works just
fine.
Steve
> -----Original Message-----
> From: Pete Shew [mailto:pete@xxxxxxx]
> Sent: 17 December 2003 10:02
> To: ukha_d@xxxxxxx
> Subject: Re: [ukha_d] PABX and ADSL phone lines
>
> I split off the ADSL signal and feed the filtered phone line
> to my PBX - no problem at all.
>
> You can't sensibly route the ADSL signal through the exchange
> as you would lose the "always on" aspect and tie up the
phone
> line when you were using it - even if it worked,
>
> On a slightly different topic, my exchange - Omnicom FS2828 -
> is a bit creaky and sometimes loses it's marbles, so I'm
> thinking of a self build.
> Has anyone here been down that road?
>
> Pete
UKHA 2004: 15th and 16th May 2004
http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Home |
Main Index |
Thread Index
|