The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: PR511 mounting options


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: PR511 mounting options
  • From: "Phil Harris" <phil@xxxxxxx>
  • Date: Thu, 30 Jan 2003 19:40:45 -0000
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx


Alternatively both Laser and LetsAutomate have the plastic boxes to mount
the units to...

Phil

> -----Original Message-----
> From: James,Daniel [mailto:Daniel.James@xxxxxxx]
> Sent: 30 January 2003 09:48
> To: 'ukha_d@xxxxxxx'
> Subject: RE: [ukha_d] PR511 mounting options
>
>
> Hi Paul
>
> I've used one of these:
>
> http://www.tlc-direct.co.uk/Products/LB9065.html
>
> I know its square, but the PR511 just fits within it.
>
> I mounted my light to the cover, (i ended up drilling out the other screw
> holes on the Light, and then used silicon sealant to make a
> watertight seal.
>
> Then mounted the other side of the box on the wall, and screwed the two
> together
>
> Daniel
>
> -----Original Message-----
> From: Paul Gordon [mailto:paul_gordon@xxxxxxx]
> Sent: 30 January 2003 09:47
> To: ukha_d@xxxxxxx > Subject: [ukha_d] PR511 mounting options
>
>
> What have any of you chaps with PR511's used as a mounting box?
>
> It *needs* a round electrical box, but all the ones I've seen are conduit
> boxes with side-entry...
>
> I want one that's like a standard square surface box with options
> for cable
> entry via knockouts... (I have the cable coming straight through
> the wall,
> and I want rear-entry into the box so that no cable or cable conduit is
> visible).
>
> Suggestions would be appreciated, - especially if the item in
> question turns
>
> out to be available from Homebase/B&Q etc...
>
> TIA
>
> Paul G.
>
>
> _________________________________________________________________
> Express yourself with cool emoticons http://messenger.msn.co.uk
>
>
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx > Subscribe:  ukha_d-subscribe@xxxxxxx > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx > List owner:  ukha_d-owner@xxxxxxx >
> List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
> _____________________________________________________________________
> This e-mail has been scanned for viruses by the WorldCom Internet Managed
> Scanning Service - powered by MessageLabs. For further information visit
> http://www.worldcom.com
>
> _____________________________________________________________________
> This e-mail has been scanned for viruses by the WorldCom Internet
> Managed Scanning Service - powered by MessageLabs. For further
> information visit http://www.worldcom.com
>
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx > Subscribe:  ukha_d-subscribe@xxxxxxx > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx > List owner:  ukha_d-owner@xxxxxxx >
> List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>


http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.