Quickie - mono to stereo

["Paul Gordon" <paul_gordon@xxxxxxx>]

Chaps, would I be right in assuming that if I have a mono audio souce, (A
Comfort UCM01A), and I want to connect it into a stereo input (my PC's 
soundcard), via its 3.5mm jack socket, then I can just put a mono 3.5mm
jack 
plug on the output, and the barrel on the mono plug (being just 1 segment
rather than 2) will bridge the L & R contacts in the stereo socket and
give 
audio on both channels? - I'm assuming that the tip is ground?

I know I could put a stereo 3.5mm plug onto the UCM01A output, and bridge
the L & R contacts when I solder the plug on, but I just don't happen
to 
have any stereo plugs floating around in my parts bin... (loads of mono
ones 
though!)

TIA

Paul G.





_________________________________________________________________
Stay in touch with absent friends - get MSN Messenger 
http://messenger.msn.co.uk



http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx 
Subscribe:  ukha_d-subscribe@xxxxxxx 
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.