The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: RE: Quickies .. pulling cable.


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Spycam Better than the X10



Thanks Simon,
I will give it a try.
I have one of those multi voltage power supplies (with different
size connectors and a slide switch to choose voltages from 3 to 12
v) got it from dixons - would that do the job or should I try to
find something better from Maplin or similar?

Thanks

Keyvan R
--- In ukha_d@xxxxxxx, "Simon Coates" <ecolume@g...> wrote:
> Keyvan
>
> I've had a similar problem with a small TFT screen - but it was
caused by
> the 12V DC power supply.  Changing to a decent switched mode power
supply
> cured it.
>
> Regards
>
> Simon
>
> ----- Original Message -----
> From: <keyvan@e...>
> To: <ukha_d@xxxxxxx>
> Sent: 03 February 2003 23:05
> Subject: [ukha_d] Re: Spycam Better than the X10
>
>
> > Hi Keith
> >
> > While on this subject, I bought the 4 cam deal about a year ago
from
> > the states and recently, last week in fact, bought a Kenwood lcd
> > from unbeatable (mostly based on good stuff I read here).
> > I hooked it up to my X10 camera receiver and got a so so picture,
> > but he worst part is this large white(ish) horizontal bar
scanning
> > across the image. Scanning at about 2.5 times a second
(guessing!).
> > Am I doing something wrong? Have I overlooked anything, or is it
> > just a feature the NTSC camera's output?
> > I am sending the Kenwood back anyway for exchange as it has dead
> > pixel. But I was wondering if anyone has had the scan bar issue
or
> > other problems with NTSC sources.
> >
> > Thanks
> >
> > Keyvan R
> >
> > --- In ukha_d@xxxxxxx, "Keith Doxey" <ukha@d...> wrote:
> > > Dont forget that it will be NTSC so unless all your TV's are
> > capable of 60Hz
> > > NTSC you will get B&W pictures and some older TV's may not even
> > lock to the
> > > signal.
> > >
> > > VCR's capable of NTSC PLAYBACK cannot RECORD an NTSC signal
> > >
> > > Keith
> > >
> > > www.diyha.co.uk
> > > www.kat5.tv
> > >
> > >
> > >
> > > > -----Original Message-----
> > > > From: Darren Thrower [mailto:dlt@p...]
> > > >
> > > > Just been collecting my e-mails from over the weekend (293
in my
> > Home
> > > > Automation folder!!) and one that appeared in my Inbox was
this:-
> > > >
> > > > http://www.coolonlineproducts.com/minispycam/?code=mscduw128
> > > >
> > > > Even with shipping from the states it's less than $100
> > > >
> > > > Let me know what you think as I might get a few!!
> > > >
> > > > Best regards,
> > > >
> > > > Darren Thrower
> > > > 07971 401654
> >
> >
> > http://www.automatedhome.co.uk
> > Post message: ukha_d@xxxxxxx > > Subscribe:  ukha_d-subscribe@xxxxxxx > > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx > > List owner:  ukha_d-owner@xxxxxxx > >
> > List of UKHA Groups here -
http://groups.yahoo.com/group/UKHA_Grouplists/
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >


http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.