RE: My Plamsa decision hell!

["Timothy Morris" <timothy.morris@xxxxxxx>]

No idea on the tuner - never needed one - I did hear that the old one
was crap though. I connect my DVD player via component YUV only needs
three connectors rather than four as per RGB), and everything else via
Svideo.

On connectivity. The two connectors which cannot be used at the same
time are composite and Svideo. This is because they share the same input path and someone at Panasonic decided not to put a facility to switch
between the two! RGB typically used in this country uses composite for
sync. To connect up Svideo plus an RGB source you need one of the
following (In my order of preference):

1. Equipment that can be set to output component (like my Arcam DV-88)
2. By an RGB to component converter from John Sim
3. Buy an RGB to VGA converter (sync splitter) and make up a custom lead to use the RGBHV inputs on the back
4. Use same converter through the VGA port (which comes last because it
looses some of the zoom modes)

Tim.

> -----Original Message-----
> From: White, Peter [mailto:peter.white@xxxxxxx]
> Sent: 07 January 2003 08:17
> To: ukha_d@xxxxxxx > Subject: [ukha_d] My Plamsa decision hell!
>
> Well, I said I'd keep you posted on progress.  For the full story= of
my
> decision-making hell, refer to my various threads on the excellent
> www.avforums.com, however, for the condensed version:
>
> 1. Panny/Pio/Panny/Pio etc etc.  Finally decided on Pio for
practicality
> reasons.
> 2. Nobody has stock of the Pio, unless I want to pay =A35k for the
> privilege.
> RS can't commit to a delivery date, but will sell for <=A34k. = JL
likewise,
> plus they won't match anyone that doesn't have stock.
> 3. Another few hours spent researching screens
> 4. Now decided on the Panny, with the TU-PT600 tuner, again, for the same
> connectivity issues previously discussed.  I'm reliably informed = that
the
> new Panny receiver box is a lot better than the previous effort
(direct
> pass-through of component inputs for eg).  Anyone disagree? Tim?<= BR> >
> My original plan (well, plan 14b) was to get the Panny screen with the=
RCA
> terminal board, and connect everything via my amp (i.e. s-video) apart=
> from
> the DVD, which would connect on the components.  However, the scr= een
> apparently doesn't support both inputs at the same time (grrrr), so that's
> scuppered, hence my new decision to take the receiver box.
>
> I tells ya, it's a minefield out there!  I'm off to haggle with R= S at
10
> (and to buy the Limit DVD player), so I'll let you know.  My 36&q= uot; TV
goes
> this weekend, so it's back to a 14" until the plasma arrives :-(<= BR> >
> P.
>
>
> [Non-text portions of this message have been removed]
>
>
> http://www.automatedhome.co= .uk
> Post message: ukha_d@xxxxxxx > Subscribe:  ukha_d-subscribe@xxxxxxx > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx > List owner:  ukha_d-owner@xxxxxxx >
> List of UKHA Groups here -
http://groups.ya= hoo.com/group/UKHA_Grouplists/
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/te= rms/

Yahoo! Groups Spons= or

ADVERTISEMENT

http://www.automatedhome.co.uk 
Post message: ukha_d@xxxxxxx 
Subscribe:  ukha_d-subscribe@xxxxxxx 
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.