Re: Keene IR Distribution

["Mark McCall" <Mark@xxxxxxx>]

Basic Kit - IR Distribution Amp, mains adaptor, 1 high power wand, one low
=
power wand) [IRBKIT] =A334.99 (=A329.78 ex VAT) 


Additional Items
      Low Power Wand, which can be attached
direct=
ly to the equipment facia or will work up to 4 metres away. Even when
attac=
hed directly the equipment will still respond to external IR signals.
(only=
to be used in the low power output sockets). [IRLPW] =A35.99 (=A35.10 ex V=
AT)  Powermid IR lead - to couple the Powermid output directly to the
=
IR distribution amp input (3.5mm st jack to 3.5mm st jack 1.5m long
[KLDE6]=
=A35.99 (=A35.10 ex VAT)  
      High Power Wand that will operate equipment
=
>from
required. Not suitable for one-to-one operation). [IRHPW] =A37.99 (=A36.80=
ex VAT)  Wavecom IR lead - to couple the output from the Wavecom dire=
ctly into the IR distribution amp (2.5mm st jack to 3.5mm st jack 1.5m
long=
[KLDE10] =A38.99 (=A37.65 ex VAT)  
      Side Firing Wand, A short range version to
b=
e directly attached to the equipment fascia [IRSFW] =A37.99 (=A36.80 ex
VAT=
)  Extension leads, 3.5mm st jack to 3.5mm st socket to be used on
inp=
ut or output as required. We've tested the input up to 10m and the output
t=
o 20m.
      3m extension [KLD40] =A34.49 (=A33.82 ex
VAT=
) 
      5m extension [KLD405] =A34.99 (=A34.25 ex
VA=
T) 
      10m extension [KLD4010] =A38.99 (=A37.65 ex
=
VAT)  
      Standard IR receiver (40KHz - suitable for
m=
ost domestic equipment) [IRSR] =A37.99 (=A36.80 ex VAT)  Input
splitte=
r, 1 x 3.5mm st jack to 2 x 3.5mm st jack sockets. Allows the IR dist amp
t=
o be fed by both a cabled feed (from say a Powermid) and an in-room IR
rece=
iver. [KA109] =A31.89 (=A31.61 ex VAT)  
      Wide Band IR Receiver (up to 100KHz - for
mo=
re esoteric equipment) [IRWBR] =A312.99 (=A311.06 ex
VAT)   =

  ----- Original Message ----- 
  From: Amar Nagi 
  To: ukha_d@xxxxxxx 
  Sent: Monday, January 13, 2003 3:36 PM
  Subject: [ukha_d] Keene IR Distribution


  Can anyone please tell me the catalogue number for 
  the Keene IR distribution unit ? I don't have access at work 
  Also it would be helpful to know the cat number 
  for the different bits i will need for it 

  thanks in advance 




  [Non-text portions of this message have been removed]


  http://www.automatedhome.=
co.uk 
  Post message: ukha_d@xxxxxxx 
  Subscribe:  ukha_d-subscribe@xxxxxxx 
  Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
  List owner:  ukha_d-owner@xxxxxxx
  List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/ 

  Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.=



[Non-text portions of this message have been removed]



http://www.automatedhome.co.uk 
Post message: ukha_d@xxxxxxx 
Subscribe:  ukha_d-subscribe@xxxxxxx 
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.