The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Composite Video


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Not Home Automation but more Work Automation (UKWA)



hiya!
looks like the chappie - APC looks like they have expanded & renamed it
too!
I suppose 'Environmental Monitoring' sounds better than Measure UPS :)

Take a look on the APC site - just to be sure it will fit your model APC
etc...
http://www.apcc.com/products/family/index.cfm?id=47
http://tinyurl.com/f9o7

The range looks like it could have expanded since I last looked. (its been
a
while) - The units in the photos used to plug into the interface expander
on
the APC or into an interface expander via an external case. Alerting still
seems to be there tho via PowerChute and can be based on temperature
humidity and even smoke alerts too!


Hope it Helps
Wayne.



----- Original Message -----
From: "Stuart Billinghurst" <stuart@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Wednesday, June 25, 2003 9:10 PM
Subject: RE: [ukha_d] Not Home Automation but more Work Automation (UKWA)


I do use the APS UPS's.. We also brought the card for the AC only £80..

I've looked on the APS site and found some info in the help on the Measure
UPS.. But no indercation of what it is.. Is this it :
http://www.idg.net/english/crd_internet_1300326.html
/
http://tinyurl.com/f90d

Thanks,
-----Original Message-----
From: wayne [mailto:wayne@xxxxxxx]
Sent: 25 June 2003 14:30
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] Not Home Automation but more Work Automation
(UKWA)


Hiya,
just a quickie - if you have (I would hope!) battery backup for your
servers - and IF its an APC unit - they do a little addon called a
'Measure
UPS(?)' that has NO / NC contacts as well as an external temp sensor.
This
can then be tied into thier PowerChute software -which in turn can
generate
alerts etc...

hope this is helpfull
Wayne.


----- Original Message -----
From: "Stuart Grimshaw" <stuart@xxxxxxx>
To: "UKHA List" <ukha_d@xxxxxxx>
Sent: Wednesday, June 25, 2003 8:46 AM
Subject: Re: [ukha_d] Not Home Automation but more Work Automation
(UKWA)


> I reckon Dallas 1-wire sensors would do the trick. DS1820's and the
> DS9097 serial interface.
>
>
>
> ** UKHA2004 BE THERE! ** - start planning now.
>
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.