Re: Mv1000

["Paul Robinson" <ukcueman@xxxxxxx>]

Brian,

I suggest you make sure the serial cable is correct first. It's a
cross-over
(null modem) cable, not a straight-through cable.

Echo and LF shouldn't stop you from receiving the information the MV1000
sends down the serial when it first boots.

HTH
Paul

----- Original Message -----
From: "Brian G. Reynolds" <brian.g.reynolds@xxxxxxx>
To: "Ukha_D (E-mail)" <ukha_d@xxxxxxx>
Sent: Wednesday, July 02, 2003 9:57 PM
Subject: [ukha_d] Mv1000


> I knew it would not work :-(
>
> Just taken delivery of my first Mv1000 and can not configure it...
>
> I have connected a serial cable with a gender-changer on one end to a
comm. port on a W2K box, opened Hyper Terminal made a new connection with
the correct settings booted the Mv1000, the green light flashes as stated,
goes off, comes back on, then after about 30 seconds goes off again.
>
> I have a feeling the box is okay but HT is not displaying anything...
>
> I have not used HT very much, read never, so can anyone give me any
pointers please?
>
> The documentation says to turn off echo and LF but how do I do that? I
thought type "echo off" but I do not think that has done
anything...
>
> TIA,
>
> B