The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: Clipsal faceplates and modular inserts...


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Stuffed by a lighting circuit


  • To: ukha_d@xxxxxxx
  • Subject: Re: Stuffed by a lighting circuit
  • From: "Chris Malme" <ChrisM@xxxxxxx>
  • Date: Sun, 06 Jul 2003 09:49:43 -0000
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Alas, it appears that the wires have been laid without conduit, and
are simply embedded deep in the plaster. Looks like they were saving
money all over when they built these houses.

There is one possibility that has occurred to me - there is a 13 amp
socket at skirting board level on the other side of the wall. It is
possible that I could drill through and run a feed from neutral from
that without too much grief or redecoration required, which would
then give me a live and neutral to run the module from. As the live
is still coming from the lighting circuit, I think that should still
be ok, safety-wise.

Comments?

Chris

--- In ukha_d@xxxxxxx, "Neil Fuller" <neil@f...> wrote:

> Sounds like it's been wired in 'singles'?
>
> If so, potentially, it's good news, because they must have
> pulled them in, in conduits?
>
> If the cables are in conduit, you can rewire how you see
> fit. If not, I'm perplexed!





Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.