[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Video Amp PCB Design
- To: <ukha_d@xxxxxxx>
- Subject: RE: Video Amp PCB Design
- From: "Paul Gale" <groups@xxxxxxx>
- Date: Wed, 4 Jun 2003 14:49:47 +0100
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Good stuff Mark - how much do the boards work out at on small runs?
I fitted the box into my rack enclosure last night, along with loads of BNC
leads - MV1000 streaming 5 pics now :-)
Paul.
-----Original Message-----
From: Mark Marooth [mailto:MMarooth@xxxxxxx]
Sent: 04 June 2003 14:10
To: ukha_d@xxxxxxx
Subject: [ukha_d] Video Amp PCB Design
Folks,
Well, I've completed a first stab at a PCB design for Paul's Video
Amplifier.
The PCB is notionally 100mm x 50mm which should allow me to get two on a
run
>from
PCB Pool and is based on 2 in/6 out i.e. 1 Op Amp on the board.
For anyone with Proteus/ARES feel free to have a look at
http://www.marooth.org/projects/electronics/vidamp/Video_Amp.htm
I'm not able to create a PDF just at the moment but shall do tonight. This
is a
draft and still needs to be throughly checked.
To those of you who design PCB's for a living, I apologise for my humble
attempt
:o))
Cheers,
Mark
Home |
Main Index |
Thread Index
|