[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Re: Crucible Meteor....
- To: <ukha_d@xxxxxxx>
- Subject: RE: Re: Crucible Meteor....
- From: "Kevin Hawkins" <lists@xxxxxxx>
- Date: Thu, 5 Jun 2003 16:07:16 +0100
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Mark - looks like another problem here - the red led should come on as
soon
as you open a HyperTerminal session on that port - the baud rate and flow
control are not even required to be set (correctly) to accomplish this.
Re the xAP connector - I have now installed and run this and it works
perfectly on XP, so I think you have a hardware issue. Could your Meteor
have become fried too by the power surge ? Or one last possibility - could
the port you are using somehow not be the correct one or be in use by
another application ? I think the latter is unlikely as if another
application had grabbed it I suspect the Meteor light would be on, unless
there is another way of reserving a port without actually opening it.
Kevin
-----Original Message-----
From: Stuart Poulton [mailto:stuart.poulton@xxxxxxx]
Sent: 05 June 2003 14:15
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] Re: Crucible Meteor....
Mark,
The meteor unit works under xAP with Patricks connector. I've only used
it under linux, but upon starting the xAP connector the power LED on the
meteor illuminates :)
Stuart
On Thu, 2003-06-05 at 13:37, mark_harrison_uk2 wrote:
> Thanks all for the rapid feedback.
>
> I wasn't running their software, for reasons that will be obvious to
> anyone who knows me.
>
> Does anyone know HOW to force the appropriate line to go high within
> Hyperterminal?
>
> Regards,
>
> Mark
>
>
> --- In ukha_d@xxxxxxx, "Kenneth Watt" <kwatt@f...> wrote:
> > > Any ideas? Are the lights meant to light up???
> >
> > Paul's correct Mark, the unit does nothing till it is connected
to
> a serial
> > port as it draws power from there.
> >
> > K.
>
>
>
> ** UKHA2004 BE THERE! ** - start planning now.
>
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe: ukha_d-subscribe@xxxxxxx
> Unsubscribe: ukha_d-unsubscribe@xxxxxxx
> List owner: ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--
Stuart Poulton <swp@xxxxxxx>
Home |
Main Index |
Thread Index
|