[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Re: Programming a Panasonic KX-TD816 PABX
- To: <ukha_d@xxxxxxx>
- Subject: RE: Re: Programming a Panasonic KX-TD816 PABX
- From: "Martin" <ukha@xxxxxxx>
- Date: Fri, 6 Jun 2003 17:00:34 +0100
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Are you using the PBX software from the PBXsoftware site ?
I have a KX-TA624 and using the software from the PBXSoftware site I
also get errors reading the ports but it seems to upload everything
correctly, I think its their software.
I recently installed a few of the newer KX-TDA systems and that just
uses a standard RS232 cable (or USB), so I don't think the cable is
anything special.
-----Original Message-----
From: Stuart [mailto:stuart@xxxxxxx]
Sent: 06 June 2003 11:48
To: ukha_d@xxxxxxx
Subject: [ukha_d] Re: Programming a Panasonic KX-TD816 PABX
I made this cable up from the site but I keep getting communication
errors, I've checked the quality of the cable and all is fine.. I
even get most of the data in and out but keep getting errors!
I may have some pins missing that the offical Panasonic programmer
would require that pbxsoftware dosen't.. not that I am sure what
they could be..
Any Idea's?
Thanks,
-
Home |
Main Index |
Thread Index
|