The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: {Disarmed} RE: [OT] TalkTalk Broadband - WTF?


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Any recommendations for ceiling speakers



How about going to your local car spares place (maybe Halfords?) and get
some sound deadening material they use for cars?

Neil

-----Original Message-----
From: James Winspear [mailto:james.winspear@xxxxxxx]=20
Sent: 06 March 2003 13:06
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Any recommendations for ceiling speakers


I started listening properly to my B&W CCM20's last night, and I
ceiling
mounted them between our old oak beams, and placed wooden blocks between
th=
e
beams in the ceiling void.  As there's virtually no gap between the top of
the speaker and the chipboard floor above, there's almost an effective
speaker enclosure - however, in the room above there's an awful lot of the
bass end of the sound that can be heard.  I can't, but if possible I'd
recommend some form of sound proofing above any enclosure.

James

-----Original Message-----
From: steve.cooper@xxxxxxx [mailto:steve.cooper@xxxxxxx]=20
Sent: 06 March 2003 11:42
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Any recommendations for ceiling speakers


>> Mine don't sound tinny at all, (they are the waterproof ones from
>> henrys.co.uk) I didn't try them un-mounted tho, but I would
imagine=20
>> that
the
>> space they fit into creates a speaker enclosure of sort which
would
enhance
>> sound reproduction.

Well last night I tried the highly scientific approach of cutting a hole in
a cardboard box and inserting one of the henrys speaker in it.  I have to
say that there was a very noticeable change in the sound reproduced.  We
need to have our ceilings plaster boarded (they are covered in glue where
the original ceiling tiles were) so I'm going to mount the speakers in the
position we want and move on to the in location testing phase.

By the way the speaker source switch from Maplins that Mark H pointed out
for running the speakers off of two sources works great and only cost
=A310=
.

S.




http://www.automatedhome.co.uk=20
Post message: ukha_d@xxxxxxx=20
Subscribe:  ukha_d-subscribe@xxxxxxx=20
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx=20
List owner:  ukha_d-owner@xxxxxxx=20

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/=20


http://www.automatedhome.co.uk=20
Post message: ukha_d@xxxxxxx=20
Subscribe:  ukha_d-subscribe@xxxxxxx=20
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx=20
List owner:  ukha_d-owner@xxxxxxx=20

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/=20




Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.