The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Should a US X10 remote be compatible?


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Clipsal C-Bus review now on-line!



Hi Dean
My setup is a retrofit .. so i have left the existing wiring
in......hence no neutrals at the control box........

> outgoing circuits live should then be routed through a 1 or 2amp MCB
to
> provide suitable protection to those circuits.

I take it you mean to protect the Dimmer triac ??? Does Clipsal recommend
using  c/b,s for protection ? Personally i would use hrc fuses ....... Any
Clipsal document reference for this Dean  ??

Frank

----- Original Message -----
From: "Dean Barrett" <dean@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Friday, March 07, 2003 9:05 PM
Subject: RE: [ukha_d] Clipsal C-Bus review now on-line!


> Do you mean that you can see lives but no neutrals, or that the
outgoing
> circuits go via seperate MCB's
>
> All neutrals are taken to a common location, usually on a row of
'clip-on'
> terminals connected together, back to the single neutral incomer.
>
> The Dimmer modules are fed via a common incoming feed - 6/10amp etc. -
each
> outgoing circuits live should then be routed through a 1 or 2amp MCB
to
> provide suitable protection to those circuits.
>
>
>
> Dean.
>
>   -----Original Message-----
>   From: yahoo@xxxxxxx [mailto:yahoo@xxxxxxx]
>   Sent: 07 March 2003 09:37
>   To: ukha_d@xxxxxxx
>   Subject: Re: [ukha_d] Clipsal C-Bus review now on-line!
>
>
>   Frank,
>
>   One question, the second to last picture that is on the review shows
the
> wiring
>   of the C-bus modules. It appears that the cabling from the lights
etc
> doesn't
>   go directly into the c-bus modules. Is this the case? If it is what
are
> they
>   connected through?
>
>   JB
>
>   coming into some
>
>   > Frank's review and pictures of his C-Bus setup is now
on-line...
>   >
>   > http://www.automatedhome.co.uk/article.php3?story_id=1173
>   >
>   > M.
>
>         Yahoo! Groups Sponsor
>               ADVERTISEMENT
>
>
>
>
>   http://www.automatedhome.co.uk
>   Post message: ukha_d@xxxxxxx
>   Subscribe:  ukha_d-subscribe@xxxxxxx
>   Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
>   List owner:  ukha_d-owner@xxxxxxx
>
>   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
> [Non-text portions of this message have been removed]
>
>
>
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>


http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.