The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: Newbie with lots of basic questions!!


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Re: VIOP Gateway



ok does this mean that you could use two of these routers.....in FXO
mode....to connect your home and office pabx and make them seem as one?

What I mean is that when someone calls the office your home phones ring as
well and vice versa.....and you could pick up a handset from home....dial
the FXO attached line or extension...then dial your office and onward link
to the pstn from there?

Is any/all of this possible? If it is then with a VPN you have total sit at
home but look like you are in the office:)


Mick
-----Original Message-----
From: patricklidstone [mailto:patrick@xxxxxxx]
Sent: 01 May 2003 00:08
To: ukha_d@xxxxxxx
Subject: [ukha_d] Re: VIOP Gateway


--- In ukha_d@xxxxxxx, "Ian  Willoughby" <ian@i...> wrote:
> Sir you are a genius!
>
> This looks like it could fit the bill perfectly, I was looking at
> upgrading to a 2600 router anyway, and I am guessing that the FXS
> facility shouldn't come in too much more expensive (I hope).
>

And at the other end of the scale, check this out:
http://www.aa.nu/aa/splice/

Particularly like the idea of a touch colour screen handset. Imagine
the HA possibilities there!

Patrick



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.