[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: [OT] Water or refrigeration PC cooling
- To: <ukha_d@xxxxxxx>
- Subject: Re: [OT] Water or refrigeration PC cooling
- From: "Ian Lowe" <ian@xxxxxxx>
- Date: Thu, 1 May 2003 11:00:27 +0100
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- References: <200305010919.h419J7k19048@xxxxxxx>
- Reply-to: ukha_d@xxxxxxx
----- Original Message -----
From: "Kenneth Watt" <kwatt@xxxxxxx>
>
> > I plan to experiment on an old Athlon proc... I'll keep you
posted ;)
>
> I have visions of you sitting late at night Ian faffing about in a
Bio-suit
> with a load of gloop a PC and various bits and pieces strewn around
the
> room.
>
> Mad scientist at work! ;)
>
> K.
It's a hard to maintain image, but it works :)
I'm actually quite buzzing at the idea of this one... and busy doing a lot
of the ground work (like asking maxtor if their drives are watertight...
not the easiest question to get a serious answer to!!!!)
it's figuring out what should be inside the liquid cavity, and what should
be outside... all good fun :)
As an aside, does anyone know a supplier of 60m - 1cm thick acrylic or
perspex?
Ian.
Home |
Main Index |
Thread Index
|