The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: iPhone 4 bumper refunds


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Serial Protocol Capture...



Yup.... this is the way it works in transparent mode...
Just put a PC with two COM ports between the serial device and the PC
hosting the application/driver.

I have test it with some GSM modems, at 115200 bps and at 4800bps (X10),
but
it must work at other speeds too...

Best regards,
Dan

----- Original Message -----
From: "Des Gibbons" <des@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Sunday, May 04, 2003 1:32 PM
Subject: RE: [ukha_d] Serial Protocol Capture...


>
>
> >
> > Thanks Dave, that looks like it will do the trick.
> >
> > If I had a spare COM port, I would be able to use Dan's monitor,
but I
> > don't, so it' s "roll your own" time.
>
>
> I think Dan's software would be used on a spare PC with 2 comports to
do
> what you want to. Sort of like a sniffer on the line inbetween your
target
> hardware and the other PC with the target software.
>
> Havn't used it so that is only an assumption, Dan?
>
> Cheers, Des.
>
> >
> > ----- Original Message -----
> > From: "Dave McLaughlin" <dave@xxxxxxx>
> > Subject: RE: [ukha_d] Serial Protocol Capture...
> >
> >
> > > Hi Ian,
> > >
> > > Not 100% sure if this will do what you want as it requires
some
software
> > to
> > > be written, but I use their LPT stuff and it works great.
> > >
> > > http://www.entechtaiwan.com/commspy.htm
> > >
> > > Regards
> > > Dave...
> >
> >
> >
> >
> > ** UKHA2003 BE THERE! Details here:
> > http://www.automatedhome.co.uk/article.php3?story_id=1110
**
> > http://www.automatedhome.co.uk
> > Post message: ukha_d@xxxxxxx
> > Subscribe:  ukha_d-subscribe@xxxxxxx
> > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> > List owner:  ukha_d-owner@xxxxxxx
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >
>
>
>
> ** UKHA2003 BE THERE! Details here:
http://www.automatedhome.co.uk/article.php3?story_id=1110
**
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>




Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.