RE: IR dist blocks

["Paul Gale" <groups@xxxxxxx>]

Thanks Frank :)

I may give that a go - I presume it would be compatible with standard
mini-=
emitters? (I have several doing nothing here). Circuit diag would be nice
:=
)

Paul.



-----Original Message-----
From: Frank Mc Alinden [mailto:fmcalind@xxxxxxx]=20
Sent: 31 October 2003 10:28
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] IR dist blocks

Hi Paul
You can make up your own ir driver similiar to your Kustom
one....Just use a 12v supply on the the transistor  side..Thats what i do
with the ir zone splitter....4 IR leds in series with a 68 ohm resistor
across each jack ,so if not used there is still a circuit...an 8 way is
2....4ways in parallel....I will have a look for my schematic and send it
t=
o
you if your interested.....
HTH
Frank
----- Original Message -----=20
From: "Paul Gale" <groups@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Friday, October 31, 2003 9:17 PM
Subject: [ukha_d] IR dist blocks


I=92m running HV with an expansion board. However, I=92ve already used up
a=
ll
the outputs. Do all the IR dist blocks available work with HV Pro? Any
recommendations for something that will give me 2 to 4 outputs from a
singl=
e
input?

Alternatively, can I simply connect two emitters to one HV output as still
get a good strong output?

Paul.





UKHA 2004: 15th and 16th May 2004

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




UKHA 2004: 15th and 16th May 2004

http://www.automatedhome.co.uk=20
Post message: ukha_d@xxxxxxx=20
Subscribe:  ukha_d-subscribe@xxxxxxx=20
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx=20
List owner:  ukha_d-owner@xxxxxxx=20

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/=20