RE: Recommendation for a wireless or wired pan and tilt camera

["Paul Gale" <groups@xxxxxxx>]

=A31000 for the 2130 is a little too steep! Was thinking more around the
co=
uple of hundred - Any alternatives to the Xcam (BTW, how good is the Xcam?)

Paul.



> -----Original Message-----
> From: Hawes,Timothy Edward (GEG) [mailto:haweste@xxxxxxx]
> Sent: 20 November 2003 12:46
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] Recommendation for a wireless or wired pan and
tilt
> camera
>=20
> Paul,
>=20
> I just happened to be on the Axis website when you posted. There's a
> couple of products on there you may be interested in:
>=20
> "basic" camera
> http://www.axis.com/products/cam_2130/index.htm
>=20
> Wireless kit:
> http://www.axis.com/products/80211b_device/index.htm
>=20
> The cameras are ethernet/IP-based with built in webservers. Plug them
int=
o
> your LAN & view images on any PC.
>=20
> There's a demo "film" available on the site, see the right
hand side of
> this page:
> http://www.axis.com/products/video/index.htm
(under "what is a network
> camera")
>=20
>=20
> I don't think Axis are particularly cheap, but it is quality gear and
> should do all you want :-)
>=20
> HTH,
>=20
> Tim H.
> (no connection, just impressed)
>=20
>=20
> > -----Original Message-----
> > From: Paul Gale Sent: 20 November 2003 12:24
> >
> > I want to be able to watch Tom, my new puppy in the kitchen
> > (so I can tell him off when he chews something) =96 trouble is
> > I=92m in the office upstairs. Any recommendations for a pan and
> > tilt camera? What=92s good and what=92s not?  =96 could be
wireless
> > or I could use a Kat5 unit to send the signal to my A/V
> > switcher and into my dist system.
> >
> > Paul.
>=20
> +
>=20
>=20
> UKHA 2004: 15th and 16th May 2004
>=20
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>=20
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>=20
>=20
>=20