[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: ADSL
- To: <ukha_d@xxxxxxx>
- Subject: RE: ADSL
- From: "Des Gibbons" <des@xxxxxxx>
- Date: Fri, 21 Nov 2003 15:48:43 -0000
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Hi Rob,
You could rewire so that you have adsl available on all sockets, and the
use
a filter for those sockets that you want non-ADSL eqpt plugged into.
It all depends if you have an engineer install or a wires only install. On
the wires only, you have adsl everywhere, and use the filters to block the
adsl.
With an engineer install, you have the adsl blocked at the NTE and no adsl
signal downstream.
You can convert an engineer install into a wires only install, by changing
the faceplate on the NTW I think.
Does that make sense.
Cheers, Des.
> -----Original Message-----
> From: Rob Mouser [mailto:rmouser@xxxxxxx]
> Sent: Friday, November 21, 2003 15:35
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] ADSL
>
>
> OK, so this is probably the daft question of the day, but..........
>
>
>
> If you have ADSL enabled on your BT master socket, can you then plug
an
> ADSL devise into another extension in the house, provided you have a
> micro filter plugged in?
>
Home |
Main Index |
Thread Index
|